Очень важно!

"предлагаю свой вариант:

Правим файл NETHASP.INI, который находится в папке платформы 1С
Добавляем следующие строки:


;...
[NH_COMMON]

;...

;правим+
NH_IPX = Disabled ; Use the IPX protocol
NH_NETBIOS = Disabled ; Use the NETBIOS protocol
NH_TCPIP = Enabled ; Use the TCP/IP protocol
;правим-

;...

[NH_TCPIP]

;...

;правим+
NH_SERVER_ADDR = 10.36.239.200
NH_USE_BROADCAST = Disabled
;правим-

;..."

"А вот мой вариант (один ключ для УРИБ у меня на grafic - 192.168.10.4 и второй ключ от Опер. учета на serv - 192.168.10.6):
nhsrv.ini
[NHS_SERVER]
NHS_USERLIST = 250 ; maximum number of concurrent logins
NHS_SERVERNAMES = grafic ;cad, test1, ; server names to match the name a client
NHS_HIGHPRIORITY = yes ; run LM at high priority (default=no)
[NHS_IP]
NHS_USE_UDP = enabled ; enabled or disabled (default: enabled)
NHS_USE_TCP = enabled ; enabled or disabled (default: enabled)
NHS_IP_portnum = 475 ; IP port number (default: 475 (IANA registered))
[NHS_IPX]
NHS_USE_IPX = enabled ; enabled or disabled (default: enabled)
NHS_AppendAddr = no ; append to haspaddr.dat (default: replace)
NHS_usesap = enabled ; enabled or disabled (default: enabled)
NHS_ipx_socketnum = 0x7483 ; IPX socket number (default: 0x7483)
[NHS_NETBIOS]
NHS_USE_NETBIOS = enabled ; enabled or disabled (default: enabled)
NHS_NBNAME = grafic ; use another than predefined NetBios name

NETHASP.INI
[NH_COMMON]
;;NH_IPX = Enabled or Disabled ; Use the IPX protocol
NH_NETBIOS = Enabled ; or Disabled ; Use the NETBIOS protocol
NH_TCPIP = Enabled ;or Disabled ; Use the TCP/IP protocol
[NH_NETBIOS]
NH_NBNAME = serv ; ; Assign a name to the NetHASP
[NH_TCPIP]
NH_SERVER_ADDR = 192.168.10.6, 192.168.10.4 ;, ; IP addresses of all the NetHASP
NH_PORT_NUMBER = 475 ; ; Set the TCP/IP port number. This is
NH_TCPIP_METHOD = TCP ;or UDP ; Send a TCP packet or UDP packet
NH_USE_BROADCAST = Disabled ;Enabled or Disabled; Use TCPI/IP Broadcast mechanism.
"